Ulincos U16C2 Latching Metal Pushbutton Switch

I bought these to install a back and front facing camera in my F-150. The diagram of how to wire it in the photos was very helpful; you do need a soldering iron and since I don't do this on a daily basis I purchased an inexpensive soldering iron: Vastar® 60W 110V Adjustable Temperature Welding Soldering Iron with 5pcs Different Tips, additional Solder Tube and Stand for Variously Repaired Usage It came with everything I needed and I found the metal stand to be quite helpful in holding the iron while I held the switch and solder below to work.I used some left over speaker wire I had; 22 gauge and some heat shrink tube around the soldering points. I used a step drill bit in order to make the proper size holes and they fit like a glove. The blue is bright, but not too blinding, if I did it again I'd probably purchase white because the blue doesn't quite match my gauges.Once wired you can test the switch on a 9v battery to ensure it functions.Something to note is the silver nut is not meant to be visible, it gets screwed on after you put the switch through the hole.

Dear Seller: I accidentally ordered this one instead of the upgraded version, I didn't realize until i had it in my hand and saw it wont fit the pigtail for the upgraded version, it was too late for me, I needed it to turn on my battery voltage sensor in my car and I had everything dismantled waiting for the delivery, I decided to just try to use it still.. couldnt be that hard... soldered one on the negative, and as soon as the solder touched the NO1 prong i heard a click, i didnt even get to hold my iron to the prong, the heat of the solder alone and the switch stopped latching immediately.. Its so tiny and so fragile then to solder it and it breaks. :( I wasted my money and my time.EDIT: Was contacted by seller and sent the upgraded switch with a pigtail. it arrived 2 days after my first review. These guys are the best and that switch is nice, pics of after install b4 i painted and cleaned up my mods. I def will be buying from these guys again. Most likely more switches and a car backup camera.

I installed the Red and Blue versions of these switches on my RAM 1500 to power some Nilight Spot lights and a 30" light bar and could not be any happier. The prongs are extremely small and fragile so you need to be very careful when soldering the wires on to them and the switch is very long so you need to make sure you have enough space for the switch and wires, but those are my only complaints. I am a beginner so I took my time soldering the wires on to the prongs very carefully. I used 18 gauge wire but I think a higher gauge wire would work better. I had to connect these switches to the car battery (12V) directly so if you plan on doing this make sure you have a 5 amp fuse between each switch and the car battery. Can't say enough good things about these switches. All other car switches are large and bulky and do not look good. These were a perfect fit!

These little switches are amazing. I love the way the look, and feel. The white light isn't too bright to be distracting at night, but bright enough to be clearly visible during the day. I have mine wired to the parking brake lead on my remote start system. I have a manual transmission so this button has to be pushed in order for my remote start to work. It's just a extra step to make sure the transmission is in neutral. Also I can turn off the remote start completely using this switch if someone else is driving my vehicle. Overall I highly recommend this switch. They look and work fantastic!UPDATE: It's been a couple months and the switch is still functioning perfect. Very happy with the switch!

So this switch came exactly as described. And looks to be a quality made switch. However, pay attention to what it is youre ordering, unlike me. I did not realize ( or read the reviews ) that tbis switch requires that you solder the wires to connectors on the butt. I have reached out to Ulincos in hope of them allowing me to exchange the switches for some with pigtails available ( even though I take full responsibility for the mixup ). I'm hoping Ulincos will show mercy, and allow me to make the swap pain free, as well as guide me in the right direction for the switch it is that I need. Let us hope**Update** So these guys have by the best customer support team ever. They didn't just send me an email asking what they could do..... They sent an email saying they had already done it. They created an order with 2 switches and 2 pigtails, shipped to me, free to me, no questio s asked. Uodated to 5 stars, regardless what they replacements look like or how they function. Broken or not, your customer support had earned you permanent buyet.

I originally meant to order a momentary switch but in a drunken fit order this instead. I wasn't sure it would work for what I wanted, so once again, in a drunken stuper I gave it a shot. Surprisingly enough, it works great! It came with a small instruction paper to explain how to rig it so the light is either always on or only one when the button is pressed. I chose the later and it's been working great for the last week or so. Again, time will tell how these cheaper things work out, but up to this point it's been great!. It is well made, and the picture displayed is accurate to the actual product. The company has been great about following up to make sure delivery was on time and the product worked, so I really can't complain.

The switch is ok. The place that is it mounted does receive a fair amount of sun. The metal has changed color pretty drastically, so it's not UV resistant.Don't plan on the black staying black if the switch gets any amount of sun.