Kolpin85640 Universal ATV/UTV Bolt on 2" Receiver Hitch 3-Way Multi-Purpose, Green Desk Only

I bought this in hopes I would be able to use a trailer ball as well as attach my garden tractor carts. The construction is strong enough, but no matter how tight (using a breaker bar), when backing up the small garden trailers it always moves to the side.Also because of the distance from the tractor towing bolt to the towed trailer hitch, the receiver bends down. This is due to the long distance of the trailers hitch pin location and the softer rear tractor hitch hole.I think a receiver that bolts to the back of the tractors vertical panel as well as the horizontal towing hole would work better. Amazon has hitches that bolt to the tractors vertical plate and horizontal towing hole. I'll be looking for one, next.I just ordered a Hoden Hitch receiver with support brace. It will bolt through the hitch hole in my tractor. I can drill 2 more holes for added support if needed. I will need to drill a hole for the back brace. However this should give me better pulling support, when I tow/move my highway trailer.

Made pretty well, mounted on a 2000 Sportsman 500, it will fit a normal 2" receiver. However in my case, the mounting bolts head kept the hitch pin holes just put of alignment. If I decide to use my normal drop, I will have to grind an 1/8" off the back of the drop to line up the hitch pin. Most likely I will just buy the 3/4 shank ball for the supplied drop and call it a day. As for pulling my garden trailer around, it held up to some good weight hauling dead pine trees in the woods

Replaced the Coleman with this as you can mount it either way (lower or normal). Also has a more aggressive star washer preventing swiveling. Make sure you put the star washer on top of the hitch mount. On my 2021 Rubicon the bolt goes on top of the ATV mount, then the star washer, then the hitch, lock washer and nut on the bottom.

This was exactly what I needed to put a 2" receiver on the back of my Kawasaki Mule SxS without paying $hundreds to a dealer. It works perfectly; the only thing I've noticed is if I have a lot of side torque (e.g., extended tight turns), it can spin slightly (<1/8 turn) on the mount. No big deal and nothing unsafe, just something to be aware of.

The construction is very good but the attachment point is not.The hitch bolted onto my Kawasaki Prairie 300 perfectly, but when I tried to back a trailer around a corner the receiver moved to the side. No matter how tight I got the bolt, the receiver moved when backing up.Putting 2 tack weld on the side of it fixed the issue. It won't move without breaking the welds.Also, the receiver is shorter than a standard truck receiver so you cant use a standard hitch in it. It will have to be cut off.

I bought this to replace a hitch that had broke on my 4 wheeler. I like that I can change out the receiver on it for different ones. The easiest way to keep the hitch from spinning is having it pointed slightly to the left before tightening fully. I used a crescent wrench and a 1/2” electric impact and tightened it down. Because I had it slightly to the left before I completely had it tightened down it ended up perfectly straight and has not moved. It also depends on how the provided lock washers are placed.

It rattles and I mean loudly when you are riding on the atv. The rattle comes from the pin that holds the 2 pieces together. It can be annoying. It is heavy duty though and does work.

This thing is a back saver. I installed this on my 2012 Kawasaki Brute Force because I use this to haul my 6x12 trailer around and it's difficult to hook up the trailer by myself because the ball is so far under the frame. Installing this has made this job a cinch. Would buy again. Only complaint I have is I didn't by it sooner.

I installed this and I was sceptical but did it anyway. The hitch does not tighten enough and therefore will move side to side. One single bolt to stop it from twisting inst enough.

Installation was super easy. The alignment moved after some use. Tac welded it onto my ATV receiver. No issues. Perfect adaptor for my end use.

Bolt is too short to use with washers. Good for adding extra length to atv so you can turn a trailer but as always it swings too.

Works great, never had an issue with it. It will sway a bit due to the single point connection however I never plan on towing more than I have to.

It was exactly as advertised